Elastomeric Coating For Heat Reflective, Weathershield and Waterproofing. Efficient energy saving coating
Greenshield 108 is a water-base flexible coating made from the acrylic resin system fortified with vacuumed sodium borosilicate ceramic micro spheres, which acts as a closed cell in an entire mastic. Its high reflectance and emittance properties coupled with its very low conductivity value, provides an efficient heat retarded and thermoresistant blanket covering the entire structure, thus saving energy. It is typically used as a roof coating where anti-fungi and weather resistant membrane-like coating is required. Other features include its excellent adhesion to a wide variety of substrates, resistance to dirt pick-up, retains flexibility after aging and breathable for vapor to escape while remaining watertight.
Greenshield 108 is an excellent energy conserving elastic coating designed for roof, walls and substrates that requires heat reflective & waterproofing protection. Greenshield 108 is a green product that is eco-friendly and is safe for both the applicator and the environment. It is recommended for exterior use for all residential and commercial buildings.
Uses
• Heat reflective and waterproof coating for
• Metal, clay or cement tile roof
• Old & new metal roofing sheets
• Old & new concrete roofs
• Concrete flat roofs
• Polycorbonate roofing sheets
• All kinds of wall
• Container Office
Packing: 20 litres per pail
Coverage: 3 coats system (3.3m2/litre/coat)
Areas for Application
• All types of walls
• Concrete slab roof
• Roof terraces
• Asbestos sheet
• AC roofing sheet
Application
Surface Preparation
All surfaces must be clean and free from laitance, dust, dirt, oil and grease. Surface should be power washed prior to coating without damaging the roof or cause leaks. Clean the area and apply primer to the unpainted surfaces. Let the primer dry thoroughly before applying the colour coat. For painted surfaces it is required to remove all flakes paints and apply one coat of Greenshield primer.